Semicircular head bolt is used in riveting place with large transverse load, which is widely used.

Because of its thick head and corrosion resistance, the flat cone head bolt is often used in riveting places with obvious erosion such as ship hull, water storage tank of heating furnace, etc.

Countersunk head bolt and 1200 countersunk head bolt are mainly used for riveting places with smooth surface and small load.

Semi countersunk head bolts and 1200 semi countersunk head bolts are used for riveting places where the surface must be smooth and the aluminum stainless steel countersunk head rivets are not subject to large load.

Small flat head bolts are used for riveting with general load.

Flat head and flat round head bolts are mainly used for riveting of metal plate all iron rivets or leather products, canvas, wood and other non-metallic materials.

Large flat head bolt is used for riveting place of non-metallic material.

Half space central bolt is used for riveting place with small load.

The key point of headless bolt is the riveting place of non-metallic material.

Hollow bolt is light in weight and weak in head, so it is used for riveting place of nonmetal material with small load.

Tubular bolt is used for non-metallic riveting place without load.

The key of the sign plate bolt is to rivet the factory name plate on the equipment, machinery and equipment.

Rivet is a kind of single and double-sided riveting bolts, but it must be riveted by using common tools such as manual riveting gun, electric riveting gun and manual riveting gun. This kind of bolt is very suitable for riveting places where ordinary bolts (which must be riveted from both sides) are troublesome, so they are widely used in engineering construction, cars, ships, airports, equipment, household appliances, furniture and other commodities. Among them, the open type flat round head rivet is the most widely used, the countersunk head rivet is mainly used in the riveting place which must be smooth, and the closed rivet is applicable to the riveting place where all iron countersunk head rivet is required to be riveted with high load and certain sealing characteristics.

Core punching bolt is another kind of single and double-sided riveting bolts. When riveting, hammer the exposed core on the top of the bolt head to make it flush with the inner hole of the rivet head, that is to say, the actual operation of riveting is quite convenient. It is very suitable for riveting places where ordinary bolts (riveting must be carried out from both sides) or rivets (lack of riveting gun) are troublesome. In general, flat round head core riveting is used, and countersunk head core punching bolts are suitable for riveting places where the surface must be smooth.